收藏本站
Preassembled Connector Assembly Procedure
Set-up
1. Adjust the end block according to the flange style and connector size. A
Thru-hole style : Rotate the end block so that the locating pin is facing the inside of the locator plate.
The pin has to be removed so that the end block can be rotated. Then reassemble the pin. The pin is
used to guide the platen during harness assembly. B
Floating bushing and threaded insert style:
Rotate the end block so that the locating pin is facing the outside of the locator plate.
2. Install the cable stop insert 3664-B. C
3. Install the cable guide on the mounting stud. Refer to the last page for the appropriate guide. D
4. Place the locator plate on the press and affix it using the locking screw provided.
5. Place the platen on the assembly press. Refer to the last page for the appropriate platen.
Assembly
1. Cut required cable length using one of the 3M cutting tools.
2. Remove the connector from the packing strip.
3. Slide the connector onto the guiding groove and into the end block. E
4. Slide the cable under the cable guide. If the cable should not enter into the connector smoothly, check the
flatness of the cable. F
5. Complete the assembly by bringing the press handle to the full downward position.
6. Raise the press handle and cable guide, then remove completed assembly.
7
Visually inspect to insure that:
a. The cover is fully seated. If not, check the shut height setting.
b. The cable is correctly aligned in the cover. If not, check end guide adjustment.
Two-Piece Connector Assembly Procedure
Set-up
1. Follow steps 1, 4 and 5 of the preassembled set-up instructions.
Assembly
1. Grasp 3M ? Delta Cover Strip between thumb and forefinger. While holding the adjacent cover, pull laterally
away from strip leaving the adhesive with a smooth clean edge.
2. Press cable ribs into cover alignment grooves.
3. Visually inspect to insure that the cable is properly aligned and oriented into cover grooves.
4. Engage cable/cover subassembly with connector body. Place subassembly in the locator plate with the
connector body facing up.
5. Complete the assembly by bringing the press handle to the full downward position.
6. Raise the press handle and remove the completed assembly.
7. Visually inspect to insure that:
a. The cover is fully seated. If not, check the shut height setting.
b. The cable is correctly aligned in the cover. If not, check end guide adjustment.
3
78-8133-3685-2-A
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
ASHEK4-32.768KHZ-LT OSCILLATOR 32.768KHZ 1.8V SMT
OPA729WD LED WHITE 10/1WATT 6500K ARRAY
P51-100-G-H-P-5V-000-000 SENSOR 100PSI M12-1.5 6G 1-5V
P51-750-S-T-P-5V-000-000 SENSOR 750PSIS 7/16 5V
P51-500-S-T-P-5V-000-000 SENSOR 500PSIS 7/16 5V
P51-75-G-H-P-5V-000-000 SENSOR 75PSI M12-1.5 6G 1-5V
GW5DMC27M04 LED MOD 25WATT ZENIGATA 2700K
P51-300-S-T-P-5V-000-000 SENSOR 300PSIS 7/16 5V
相关代理商/技术参数
3442-44 功能描述:D-Sub工具与硬件 PLATEN TOOL 50P RoHS:否 制造商:3M Electronic Solutions Division 产品:Accessories 类型:Strain Relief, 36 Position 用于:Wiremount D-Sub Connectors
3442-45 功能描述:MINI SOCKET CONNECTOR PLATEN RoHS:否 类别:工具 >> 压接器，施用器，压力机 - 配件 系列:- 标准包装:1 系列:- 其它名称:512A512A-NDQ1137690B
3442-46 功能描述:MINI SOCKET CONNECTOR PLATEN RoHS:否 类别:工具 >> 压接器，施用器，压力机 - 配件 系列:- 标准包装:1 系列:- 其它名称:512A512A-NDQ1137690B
344250 制造商:LITTELFUSE 制造商全称:Littelfuse 功能描述:Traditional Panel Mount Type
344250A 制造商:Littelfuse 功能描述:Fuse Holder 20A 250V Lug Panel Mount
34426 功能描述:HOSE SYSTEM 1/4 NPT CONN 1/8" RoHS:否 类别:工具 >> 散热剂软管及配件 系列:344 标准包装:1 系列:344 类型:BSPT 螺纹口连接器 样式:1/4"
344260-1 功能描述:汽车连接器 13 WAY TAB HOUSING ECONO RoHS:否 制造商:Amphenol SINE Systems 产品:Contacts 系列:ATP 位置数量: 型式:Female 安装风格: 端接类型: 触点电镀:Nickel
344260-2 制造商:TE Connectivity 功能描述:CONN HOUSING RCP 13 POS 4.8MM ST - Bulk 制造商:TE Connectivity 功能描述:Econoseal III